A BMW car provides the best experience due to its unparalleled performance and precision engineering. However, the most important part of a BMW vehicle is its finely tuned engine. Although your vehicle has an advanced engine, it may wear away early without proper maintenance. So, how will you make your car engine long-lasting? A few tips will help you upkeep the engine.
Replace the engine oil regularly
Oil is essential to a BMW engine to lubricate internal components. Remember turbocharged BMW engines are sensitive to oil quality. You should replace the old oil regularly.
A certified repair shop for BMW in Peoria, AZ will likely recommend replacing the oil every 5,000 miles. This approach will prolong your engine life and reduce carbon buildups.
Older cars with S63 engines need more frequent oil replacement. The operating temperatures of these engines are high, and they have oil usage issues.
Make sure you have chosen BMW-approved oil for proper lubrication. Low-grade oil will cause the engine to wear away prematurely.
Maintain the cooling system
Due to the higher operating temperatures, BMW engines need a cooling system. Overheating may cause warping to cylinder heads. Your engine will not work properly if it gets overheated.
So, the coolant needs occasional replacement to prevent corrosion and clogging. You must also inspect the radiator and thermostat for potential leaks.
If you overlook cooling system maintenance, it may result in engine damage.
Proper warm-up and slight acceleration
Most BMW car owners enjoy acceleration. However, aggressive driving practices before warming up the engine may cause stress to parts.
So, during the first few minutes of driving the car, you must avoid hard acceleration. The engine idle time should be around 60 seconds.
Adjust your driving habits to prolong your BMW engine
Frequent short trips are not safe for your BMW engine. This driving practice will prevent your engine from reaching the optimal temperature. It results in moisture accumulation in the oil. Your car will also experience issues with fuel combustion.
Make sure you have fully warmed up the engine before starting your short trip.
Focus on the EGR valve
The EGR valve needs thorough cleaning to allow free movement of exhaust gases. As modern engines are complex, EGR valves are highly sensitive. If the EGR does not work, it may cause various issues, such as:
- Blown head gaskets
- Degraded performance
- Higher fuel usage
- Engine knocking
- Bad acceleration
Thus, buy a carbon cleaner and wipe away deposits from the EGR. You may also hire a mechanic for this task.
Use quality fuel
The fuel type you have chosen makes a difference in engine efficiency. BMW engines need premium fuel to prevent carbon buildup and other issues. High-quality gasoline will help you avoid these issues. Moreover, the fuel injector needs cleaning to maintain fuel spray patterns.
So, these are some ways to make your BMW engine long-lasting. You can speak to a certified mechanic to repair and maintain your BMW cars. The best professionals will check other components of your vehicle at the same time.
read more : UCSB Acceptance Rate
